Bare Conductive Interactive Wall Kit



Create incredible interactive walls and murals

After hundreds of interactive wall projects, we carefully designed this kit to make it easy to plan, prototype, and produce a large-scale project. Alongside the hardware included in the kit, we have extensive digital information and inspiration to kickstart your next project.

We've created the Interactive Wall Kit to enable you to create large-scale interactive graphics, artworks, and murals. The kit includes the core components you need to build an experience up to 20m in width with 12 points of interaction, straight out of the box. Add some optional Electric Paint and make an interactive mural or use custom content to make an incredible projection mapping experience.


Create an Interactive Sound Mural

By default, the Touch Board that is part of the Interactive Wall Kit is set to play sounds, so creating an interactive sound mural is, from a technical point of view, a plug-and-play experience


Create an Interactive Projection Mapping Wall

You can also use the touch points on the wall to trigger projection mapping, allowing you to tell a story or provide an engaging way to learn about a topic.


Create Proximity Sensors

You can also create touchless or proximity sensors with the Interactive Wall Kit with copper tape or copper sheet. This is beneficial for when you don't want the user to touch the wall or where you can't drill the wall. Mustard have used this for their projection mapping installation, which you can read more about in the blog post here.


byAR - Using Projection Mapping For AR In A Museum

byAR used the Interactive Wall Kit to create projection mapping, but instead on a wall, they used a table for a museum. The animations gave the visit more information when they interacted with it. Read more about it here.


superlucid - An Interactive Solution For Events and Shows

dunkelblaufastschwarz uses the Interactive Wall Kit as part of their "superlucid" service: customised interactive wall installations for events. Read more about it here.


Frequently Asked Questions

What do I need to build an interactive wall?

We’ve designed the Interactive Wall Kit so that it can be installed by anyone without needing specialist skills.

All you need is:

1. Technology – Interactive Wall Kit and Electric Paint*
2. Creative content – Visuals and audio
3. Surface – A wall, floor, exhibition stand or retail display

*Electric Paint sold separately


How do I build an interactive wall?

Building your installation is easy and fast. With the right planning you can have it set up and running in one to two days.

Just follow these steps:

1. Create your visuals, or get someone with experience in graphics or audio/visual content to help.
2. Set up your surface, you can source a false wall or get any fabricator to build one.
3. Install and connect, just follow our step-by-step tutorials to connect our hardware.


How does it work with Electric Paint?

The Interactive Wall Kit uses the Touch Board that have capacitive sensors, which are the touch sensors for the wall. The sensors are extended with shielded cable and at the other end is an Electrode Pad. On the front side, you drill a hole and put a screw through the hole. The Electrode Pad is screwed on to the screw on the backside. The screw head is painted over with Electric Paint. Now the Electric Paint is connected via the screw to the Electrode Pad and to the back.


How do I create the sensors?

The sensors for your interactive wall can be created with a variety of conductive materials or Electric Paint. If you would like to create your sensors with Electric Paint, we suggest purchasing the Electric Paint 1L – a quantity large enough for painting walls and murals.



  • 1x Touch Board
  • 1x Electrode Shield
  • 12x Electrode Pads
  • 12x Shielded Cables
  • 42x Fixing Screws
  • 1x Interactive Wall Guide
  • 50x Cable Management Clips
  • 1x Cable Marking Set
  • 1x microSD Card
  • 1x microSD Card Reader
  • 1x Micro USB Cable