LCD TFT 2.4" Resistive Touch
PRODUCT ID: MOD-DIS-018
DESCRIPTION
Add a display to your project with this 65K/262K colours LCD TFT. This display has 240 x 320 colour pixels, which is really sharp and bright. It uses 4-wire SPI to communicate, which means you can save your microcontroller pins for other uses.
This display has a resistive touchscreen attached on it, so you can detect finger presses anywhere on the screen.
There is also a SD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted card.
Note: Input signal must be 3.3V. If you are using an Arduino you will need a level shifter.
TECHNICAL DETAILS
- Input Voltage: 5V
- Interface: 4-Wire Serial SPI
- TFT Controller: ILI9341
- Colours: 65K/262K
- Touch Screen Controller: XPT2046
- Resolution: 240 x 320
- View Area: 43 x 60mm
- Active Area: 38 x 49mm
- Dot Pitch: 0.153 x 0.153mm
- Operating Temperature: -20 to 70°C
SHIPPING LIST
- 1x LCD TFT 2.4" Resistive Touch
- 1x Stylus