Water Pump 3V 5V with Driver and Tube

PRODUCT ID: ELB200071
$12.60
OUT OF STOCK

DESCRIPTION


This water pump is fully submersible in water. It can be used for aquarium, fountain, fish pond, etc. The intake is on the bottom and the outlet is horizontal facing sideways.

You can use this pump to drain water or to create water flow and aerate your aquarium to simulate natural ocean / river environment.

Usually, you will need to connect a relay, MOSFET or a transistor to activate the pump as the power output from the microcontroller pin is too weak to drive the pump. But worry not - The pump comes with a driver module which you can connect external power so that you can drive the pump at maximum power via a signal pin.

 

FEATURES

  • Onboard driver chip can directly control the status of the water pump through IO signal
  • Power supply mode switching, which can drive high-power water pumps
  • Anti-reverse connection design to ensure safety
  • Support multiple interfaces to meet the use of different environments

 

TECHNICAL DETAILS

  • Input Voltage: 3-5V
  • Current Rating: 120mA @ 3.3V, 180mA @ 4.5V
  • Flow Rate: 80L/H @ 3V, 100L/H @ 4.5V
  • Lift Height: 0.35m @ 3V, 0.55m @ 5V
  • Shaft Diameter: 7.45mm
  • IP Rating: IP68

 

SHIPPING LIST

  • 1x Water Pump 3-5V
  • 1x Water Pump Driver Module
  • 1x PH2.0 to 3-Pin Cable 20cm
  • 1x PVC Tube 1m